This is a repair service for your defective Hobart 203655. If your Champion 10,000 welder exhibits any of the following conditions, we can help.
-The battery is dead, you tried to jump start it, but now the board is burned in the corner (near assembly number 203655)
-RPM will not return to idle
-There is damage on or near the 3 pin connector (RC4).
-No weld output or power at the receptacles, but the engine starts and runs fine.
-The red LED is ON and you have already cleaned the slip rings and replaced the brushes (inside the generator).
If it is damaged in other areas not described here, contact us.
Tip: Just pinch the top of the stand-offs to remove the board. If you break some, let us know how many you need in the order notes.
How do I get mine repaired?
Place an order and we’ll send a shipping label to your email within 24 hours (on business days). Carefully package your part and send it.
Quick repair turnaround
A qualified technician will complete the repair within One business day of delivery to us. How cool is that?
A 12-month warranty backs this repair for quality and defects.